Wings – Page 4 – Builder's Log

Rear Wing Spars Final Steps

Clecoed the rear wing spars to the wing ribs with all the doublers in place and did a few of

Cut out the holes for the pushrods in the small outboard doublers. Didn’t have the greatest method to do this,

Got the 4 aileron brackets assembled. The two outboard ones are the original design, and the two inboard ones are

Deburring all the edges and holes of the 4 aileron bracket parts… then a light scuff, clean and prime. Ready

This log entry includes work done on both Sat Mar 26 and Sun Mar 27, 2022. The very time consuming

Riveted the left main ribs onto the left wing spar. This went quite well, but a few had to be

A bunch of riveting to get the various brackets onto the left wing ribs. This consisted of flap hinge brackets

Deburred, prepped and primed the remaining 9 aft wing ribs for the left wing. Very tedious.

Started the tedious process of deburring and priming the left wing aft ribs. There are 15 of these on each

Finally resuming work on the left wing. It was a beautiful day today and nice and warm in the hangar.