Chris

HS Ribs and Stringers

Minor entry, not too photogenic, just started riveting the first ribs to the stringers and stringer web.

A light deburring on the holes of the outside skins of the horizontal stabilizer. They are already final sized, so

A couple of hours deburring the holes of the horizontal stabilizer ribs, and dimpling them. That is all.

Started work on the horizontal stabilizer skins. Removed the inside vinyl, and on the outside along the rivet lines. Then

There were an additional 6 (outboard) horizontal stabilizer ribs that needed to be edge-deburred. These ones lended themselves well to

Just some edge deburring of horizontal stabilizer ribs. HS-1004 and HS-905.Incredibly. Boring. Deburring.

First build session after moving to the new hangar, resuming work on the horizontal stabilizer. Today was spent building the

Back in the day, my hangar was outright spacious. Until I started my RV-10 build. Then it started to get

Just a couple of hours today on riveting the doubler and spar caps onto the front spar. Four different sizes

Continued work on the front spar of the horizontal stabilizer. A lot of time spent match drilling #30 spar web