Chris

Left Wing Top Skins Prep Completed

This entry contains work done this weekend and prior. All the prep work for the left wing top skins has

Work primarily done on Sunday 4/24, but a couple of hours include the clecoing work which was done on Saturday

This includes work on both Saturday and Sunday. Finally, the inboard aileron brackets are attached to the rear wing spars.This

Did some airplane work after the day job. Right Wing Aft Spar riveting complete, other than the aileron brackets. One

Almost complete. Only a couple of rivets that cannot be reached easily with the squeezer that I will have to

Final steps on the aft wing spars prior to riveting. Managed to edge-debur the spars, as well as get them

Clecoed the rear wing spars to the wing ribs with all the doublers in place and did a few of

Cut out the holes for the pushrods in the small outboard doublers. Didn’t have the greatest method to do this,

Got the 4 aileron brackets assembled. The two outboard ones are the original design, and the two inboard ones are

Deburring all the edges and holes of the 4 aileron bracket parts… then a light scuff, clean and prime. Ready